|
Industrial Strainers, Filters, Air/Liquid Separators and Accessories |
|
If you have any questions, or would like
an application specialist to select the most appropriate product for
you, please call our office at 908.362.9981 or use the "inquiry" form from the navigation menu above. |
|
STRAINERS - Macro filtration, large solids removal |
| Designed to remove particle sizes as large as sticks and fish to as small as 0.0059" (equivalent to 100 mesh or 149 microns or 0.149mm) from flow rates up to 7,931 GPM. |
| Catalog Chapter | DESCRIPTION | FLOW RANGE | APPLICATIONS |
 SIMPLEX |
Single chamber strainers, including "Y" style, that use cleanable perforated or mesh lined baskets for particle retention | up to 7,931 GPM | Batch applications where the flow can be interrupted in order to clean the basket. |
 DUPLEX |
Twin chamber strainers that use cleanable perforated or mesh lined baskets for particle retention | up to 6,390 GPM | Continuous applications where the flow cannot be interrupted in order to clean the baskets |
|
FILTERS - Fine Filtration, small particle removal |
| Designed to remove particle sizes from 0.00004" to 0.0314" (1 to 800 microns) from flow rates up to 9,000 GPM. |
| Catalog Chapter | DESCRIPTION | FLOW RANGE | APPLICATIONS |
 SIMPLEX |
Single or multiple chamber filter housings that use sophisticated disposable filter bag media for retention of particles. | up to 4,500 GPM | Batch applications where the flow can be interrupted to change the filter media |
 DUPLEX |
Single or multiple chamber filter housings that are connected together that use sophisticated disposable filter bag media for retention of particles. | up to 9,000 GPM | Continuous applications where the flow cannot be interrupted in order to change the filter media |
 FILTER BAGS |
Shop online for more than (800) filter bags made of (14) different materials | up to 180 GPM | Replacement filter bags for all filter housings in this site as well as major Industry Leaders such as Hayward. |
|
GAS LIQUID SEPARATORS |
|||
| Designed to remove fluid entrained within a gas stream. All fluid droplets 10 microns and larger from gas volumes as large as 100,00 SCFM. | |||
| Catalog Chapter | Description | FLOW RANGE | APPLICATIONS |
| Remove all entrained moisture greater than 10 microns, from gas streams having up to 20% moisture entrainment. |
≤ 6,000 SCFM |
Steam: Protect turbine blades,
ensure clean dry steam Compressed Air: following intercoolers and aftercoolers and for drying primary compressed air lines. Compressed Gas: Used in conjunction with intercooler and aftercooler applications on gas compressor equipment. Also effectively remove oil, water and tar as well as other unwanted entrainment. |
|
| Designed to remove high levels of entrainment (up to 60%) as well as fluid slugs, removing 99% of liquid ≥ 10 microns | ≤ 99,000 SCFM | ||
|
|
Condensate draining without loss of line pressure | ≤ 2,800 lbs./hr. | Each separator requires a suitable trap to control liquid removal without pressure loss. |
| Remove entrained water and oil from exhaust air, gas or steam prior to discharge into the atmosphere. | ≤ 99,000 SCFM | Reduce visible exhaust plume for steam and other moisture laden gas exhausts at the sides and tops of buildings. | |
|
BALL VALVES AND BUTTERFLY VALVES |
|
|
|
|
 |
FACTORY DIRECT PIPELINE PRODUCTS, INC. Your Single Source for Industrial Filtration and Valve Products Copyright 2001-2011 |
phone: | 908.362.9981 | |
| fax: | 908.362.5631 | |||
| email: | fdpp@fdpp.com |
