8" MODEL TC DUPLEX STRAINER, CARBON STEEL
A B C D E F G H J K L
25.00 14.00 17.00 50.63 23.06 - 30.75 ½ 28.00 0.94 56.00
You can calculate the approximate clean pressure drop, inlet velocity, & screen velocity for your intended flow rate and Specific Gravity (Sg) by replacing the default (max) values below (green boxes) with the design values.  The Sg of Water is 1.
 (The screen velocity and straining ratio are based upon the standard perforated basket and its' % open area. Use our calculations page to generate data for other perf or mesh sizes. Max. PSI based upon 100F max. temperature.)
Input Design GPM & Sg: Suggested Flow Rate Total Basket
Area (in.) 		Percentage of
Open Area 		 
(GPM) Sg Minimum Maximum  
506.7 50%  
  8   (Bronze Diverter Plug Standard, 316SS optional)
Model Connection Cv Factor Steel w/Buna Max.
PSI
TC 8" Flange 900 1,610 lb. 150
Inlet Velocity (FPS) Screen Velocity (FPS) Straining Ratio Standard Basket
Perforation:
:1 3/16" (0.1875" ~4.7625 mm)
SSU Calculated Pressure Drop (PSI) Considering Viscosity (SSU)
Perforated 40 mesh 60 mesh 80 mesh 100 mesh 200 mesh 325 mesh
30 (water)
500
1,000
2,000
3,000
5,000
10,000

Automatic recalculation