2" Flanged Model SC Simplex Strainers

2" MODEL SC Simplex Strainers in Bronze, Cast Iron, Stainless Steel & Carbon Steel


A	B	C	D	E	F	G	H
10.50	13.75	6.75	7.63	5.13	6.25	3/8	20

You can calculate the approximate clean pressure drop, inlet velocity, & screen velocity for your intended flow rate and Specific Gravity (Sg) by replacing the default (max) values below (green boxes) with the design values. The Sg of Water is 1.
(The screen velocity and straining ratio are based upon the standard perforated basket and its' % open area. Use our calculations page to generate data for other perf or mesh sizes. Max. PSI based upon 100F max. temperature.)

Input Design GPM & Sg:		Suggested Flow Rate		Total Basket Area (in.)	Percentage of Open Area
(GPM)	Sg	Minimum	Maximum	Total Basket Area (in.)	Percentage of Open Area
				50.9	47.9%
	2
Model	Connection	Cv Factor	Bronze w/Buna	Steel w/Buna	Iron w/Buna	304SS w/Viton	Maximum Pressure
72	2" Flange	73	32 lb.	36 lb.	28 lb.	31 lb.	200 PSI
Inlet Velocity (FPS)	Screen Velocity (FPS)		Straining Ratio		Standard Basket Perforation:
				:1	1/8" (0.1250 in. ~3.175 mm)
SSU	Calculated Pressure Drop (PSI) Considering Viscosity (SSU)
SSU	Perforated	40 mesh	60 mesh	80 mesh	100 mesh	200 mesh	325 mesh
30 (water)
500
1,000
2,000
3,000
5,000
10,000