• SPEED
    EASY NAVIGATION
    QUICK RESPONSES
    DIRECT SHIPMENTS
    GLOBAL SUPPORT

  • EXCELLENCE
    QUALITY SUPPLIERS
    PROMPT SERVICE
    SA
    TISFACTION IS
    #1 PRIORITY

  • ECONOMICS
    LOWEST PRICES
    FREE FREIGHT
    QUICK DELIVERIES

  • KNOWLEDGE
    FACTORY TRAINED
    OTJ EXPERIENCE
    ENGINEERING SUPPORT

 

PVDF Simplex Strainers

 

CONNECTION PART NUMBER
SIZE TYPE
½" FNPT S-BK04FTNNN
FLANGE S-BK04FLNNN
METRIC SKT S-BK04SMNNN
IPS SKT S-BK04SINNN
TRI-CLAMP S-BK04TCNNN
¾" FNPT S-BK06FTNNN
FLANGE S-BK06FLNNN
METRIC SKT S-BK06SMNNN
IPS SKT S-BK06SINNN
TRI-CLAMP S-BK06TCNNN
1" FNPT S-BK08FTNNN
FLANGE S-BK08FLNNN
METRIC SKT S-BK08SMNNN
IPS SKT S-BK08SINNN
TRI-CLAMP S-BK08TCNNN
1¼" FNPT S-BK10FTNNN
FLANGE S-BK10FLNNN
METRIC SKT S-BK10SMNNN
IPS SKT S-BK10SINNN
TRI-CLAMP S-BK10TCNNN
1½" FNPT S-BK12FTNNN
FLANGE S-BK12FLNNN
METRIC SKT S-BK12SMNNN
IPS SKT S-BK12SINNN
TRI-CLAMP S-BK12TCNNN
2" FNPT S-BK16FTNNN
FLANGE S-BK16FLNNN
METRIC SKT S-BK16SMNNN
IPS SKT S-BK16SINNN
TRI-CLAMP S-BK16TCNNN
3" FNPT S-BK24FTNNN
FLANGE S-BK24FLNNN
METRIC SKT S-BK24SMNNN
IPS SKT S-BK24SINNN
TRI-CLAMP S-BK24TCNNN
Our PVDF simplex strainers for ½" to 3" size pipelines are listed to the right.  The table includes your choice of the following Tefzel screens; when ordering replace the "NNN" in the part number with the corresponding code listed below:

 

MESH SIZE EQUIVALENT MAXIMUM PARTICLE SIZE (INCHES) ORDERING CODE
11 0.071 011
17 0.039 017
30 0.023 030
51 0.012 051
102 0.006 102
160 0.003 160

 

In addition to the Tefzel ETFE baskets above, we can offer finer mesh made of PEEK material, so if you require 12 to 155 micron filtration, please contact us and we'll need to learn more about your application.

 

PVDF basket strainers have a slanted basket design similar to our other non-alloy strainers, however they also have an o-ring seal between the strainer basket and strainer body, which enables us to retain finer solids.

 

The differential pressure calculator can be used to estimate the clean differential pressure for your specific application.  The recommended fluid velocity minimizes the effects of valve closure and pump start-up or shut-down.  The reason for the clean differential pressure limitation is to maximize the time between basket cleaning.  Once the differential pressure is ≥ 5 PSI the basket should be cleaned. 

 

Calculator Instructions:

1) Select strainer size.

2) Input the design flow rate in GPM.

3) Input the Specific Gravity of the fluid if other than water.

4) Select the Viscosity if other than water.

5) Click the "Update" button.

 

PVDF simplex strainers usually ship within 2 weeks after receipt of an order.  If lead time is critical please contact us and we'll confirm the lead time required.

 

Please click here for the PVDF simplex strainer datasheet.