Accepted Credit Cards
Factory Direct Logo INDUSTRIAL FILTRATION PRODUCTS
phone: 908.362.9981  fax: 908.362.5631  email:  fdpp@fdpp.com

 

PVC Simplex Strainers

Calculator Instructions:

1) Select strainer size.

2) Input the design flow rate in GPM.

3) Input the Specific Gravity of the fluid if other than water.

4) Select the Viscosity if other than water.

 

The corresponding clean differential pressure chart will update automatically to reflect the data input.

 

NOTE: The inlet velocity should be ≤ 5 FPS and the maximum clean differential pressure should be ≤ 2 PSI.

 
CONNECTION
(SIZE/TYPE)
O-RING PART NUMBER PRICE
  ½" SOCKET/FNPT EPDM SB1050STE $272.55
FPM SB1050ST $286.85
  ½" 150# FLANGE EPDM SB1050FE $314.10
FPM SB1050F $329.81
  ¾" SOCKET/FNPT EPDM SB1075STE $272.55
FPM SB1075ST $286.85
  ¾" 150# FLANGE EPDM SB1075FE $314.10
FPM SB1075F $329.81
  1" SOCKET/FNPT EPDM SB1100STE $272.55
FPM SB1100ST $286.85
  1" 150# FLANGE EPDM SB1100FE $314.10
FPM SB1100F $329.81
  1¼" SOCKET/FNPT EPDM SB1125STE $470.69
FPM SB1125ST $494.73
  1¼" 150# FLANGE EPDM SB1125FE $559.32
FPM SB1150F $588.01
  1½" SOCKET/FNPT EPDM SB1150STE $470.69
FPM SB1150ST $494.73
  1½ 150# FLANGE EPDM SB1150FE $559.32
FPM SB1150F $588.01
  2" SOCKET/FNPT EPDM SB1200STE $470.69
FPM SB1200ST $494.73
  2" 150# FLANGE EPDM SB1200FE $559.32
FPM SB1200F $588.01
  2½" FNPT EPDM SB1250TE $1,202.00
FPM SB1250T $1,265.14
  2½" SOCKET EPDM SB1250SE $1,202.00
FPM SB1250S $1,265.14
  2½" 150# FLANGE EPDM SB1250FE $1,333.58
FPM SB1250F $1,403.96
  3" FNPT EPDM SB1300TE $1,202.00
FPM SB1300T $1,265.14
  3" SOCKET EPDM SB1300SE $1,202.00
FPM SB1300S $1,265.14
  3" 150# FLANGE EPDM SB1300FE $1,366.14
FPM SB1300F $1,437.92
  4" FNPT EPDM SB1400TE $1,202.00
FPM SB1400T $1,265.14
  4" SOCKET EPDM SB1400SE $1,202.00
FPM SB1400S $1,265.14
  4" 150# FLANGE EPDM SB1400FE $1,517.42
FPM SB1400F $1,586.39
  6" 150# FLANGE EPDM SB1600FTE $3,449.10
FPM SB1600FT $3,630.35
  8" 150# FLANGE EPDM SB1800FTE $4,544.05
FPM SB1800FT $4,782.55
PVC Simplex Strainer

Discounted pricing for our PVC simplex strainers for ¾" to 8" size pipelines are listed to the right.  The pricing table includes PVC perforated baskets (specify 1/32", 1/16", 1/8", 3/16" perforations).  If you prefer stainless steel or mesh lined baskets please refer to the price adder table at the bottom of this page to determine the applicable cost adder

 

The basket chamber covers for our PVC simplex strainers have been ergonomically designed with large handles for easy removal without tools.  The inlet and outlet can be oriented on the same side as shown above or can be facing opposite directions (in-line flow configuration).  The strainer bottom is flat and has molded mounting slots.

 

You can install plastic strainers into alloy pipelines, however it is suggested that you also include plastic pipe at least 10 pipe diameters long on both the inlet and outlet sides of the strainer to account for the different thermal expansion rates of alloy and plastics, pipe vibration and loading forces.

 

PVC simplex strainers usually ship within 7-10 days after receipt of an order.  If lead time is critical please contact us and we'll confirm the lead time required.

 

The differential pressure calculator can be used to estimate the clean differential pressure for your specific application.  The recommended fluid velocity minimizes the effects of valve closure and pump start-up or shut-down.

 

Likewise, the reason for the clean differential pressure limitation is to maximize the time between basket cleaning.  Once the differential pressure is ≥ 5 PSI the basket should be cleaned. 

 

SB Series Datasheet - 1/2" to 4"

SB Series Datasheet - 6" to 8"

 

Cost Adder for Stainless Steel Baskets
Pipe Size ½" - 1" 1¼" - 2" 2½" - 4" 6" 8"
Perforated: 1/32", 1/16", 1/8", 3/16" $190.15 $233.85 $457.66 $800.89 $1,085.47
Mesh: 20, 40, 60, 80, 100
Mesh 200 $262.72 $313.18 $616.53 $999.47 $1,307.83
Mesh 325 $277.82 $329.59 $639.74 $1,085.64 $1,410.54