Accepted Credit Cards
Factory Direct Logo INDUSTRIAL FILTRATION PRODUCTS
phone: 908.362.9981  fax: 908.362.5631  email:  fdpp@fdpp.com

 

EASTAR Simplex Strainers

Calculator Instructions:

1) Select strainer size.

2) Input the design flow rate in GPM.

3) Input the Specific Gravity of the fluid if other than water.

4) Select the Viscosity if other than water.

 

The corresponding clean differential pressure chart will update automatically to reflect the data input.

 

NOTE: The inlet velocity should be ≤ 5 FPS and the maximum clean differential pressure should be ≤ 2 PSI.

 
CONNECTION
(SIZE/TYPE)
O-RING PART NUMBER PRICE
  ½" SOCKET/FNPT EPDM SBC050STE $308.75
FPM SBC050ST $325.03
  ½" 150# FLANGE EPDM SBC050FE $356.22
FPM SBC050F $374.12
  ¾" SOCKET/FNPT EPDM SBC075STE $308.75
FPM SBC075ST $325.03
  ¾" 150# FLANGE EPDM SBC075FE $356.22
FPM SBC075F $374.12
  1" SOCKET/FNPT EPDM SBC100STE $308.75
FPM SBC100ST $325.03
  1" 150# FLANGE EPDM SBC100FE $356.22
FPM SBC100F $374.12
  1¼" SOCKET/FNPT EPDM SBC125STE $533.48
FPM SBC125ST $561.29
  1¼" 150# FLANGE EPDM SBC125FE $633.91
FPM SBC150F $666.37
  1½" SOCKET/FNPT EPDM SBC150STE $533.48
FPM SBC150ST $561.29
  1½ 150# FLANGE EPDM SBC150FE $633.91
FPM SBC150F $666.37
  2" SOCKET/FNPT EPDM SBC200STE $533.48
FPM SBC200ST $561.29
  2" 150# FLANGE EPDM SBC200FE $633.91
FPM SBC200F $666.37
  3" FNPT EPDM SBC300TE $1,364.16
FPM SBC300T $1,435.50
  3" SOCKET EPDM SBC300SE $1,364.16
FPM SBC300S $1,435.50
  3" 150# FLANGE EPDM SBC300FE $1,549.93
FPM SBC300F $1,629.47
  4" FNPT EPDM SBC400TE $1,364.16
FPM SBC400T $1,435.50
  4" SOCKET EPDM SBC400SE $1,364.16
FPM SBC400S $1,435.50
  4" 150# FLANGE EPDM SBC400FE $1,710.16
FPM SBC400F $1,797.82
EASTAR simplex strainer

Discounted pricing for our EASTAR simplex strainers for 1/2" to 4" size pipelines are listed to the right.  The pricing table includes EASTAR perforated baskets (specify 1/32", 1/16", 1/8", 3/16" perforations).  If you prefer stainless steel or mesh lined baskets please refer to the price adder table at the bottom of this page to determine the applicable cost adder

 

The basket chamber covers for our EASTAR simplex strainers have been ergonomically designed with large handles for easy removal without tools.  The inlet and outlet can be oriented on the same side as shown above or can be facing opposite directions (in-line flow configuration).  The strainer bottom is flat and has molded mounting slots.

 

You can install plastic strainers into alloy pipelines, however it is suggested that you also include plastic pipe at least 10 pipe diameters long on both the inlet and outlet sides of the strainer to account for the different thermal expansion rates of alloy and plastics, pipe vibration and loading forces.

 

EASTAR simplex strainers usually ship within 7-10 days after receipt of an order.  If lead time is critical please contact us and we'll confirm the lead time required.

 

The differential pressure calculator can be used to estimate the clean differential pressure for your specific application.  The recommended fluid velocity minimizes the effects of valve closure and pump start-up or shut-down.

 

Likewise, the reason for the clean differential pressure limitation is to maximize the time between basket cleaning.  Once the differential pressure is ≥ 5 PSI the basket should be cleaned. 

 

SB Series Datasheet - 1/2" to 4"

 

Cost Adder for Stainless Steel Baskets
Pipe Size ½" - 1" 1¼" - 2" 2½" - 4"
Perforated: 1/32", 1/16", 1/8", 3/16" $190.15 $233.85 $457.66
Mesh: 20, 40, 60, 80, 100
Mesh 200 $262.72 $313.18 $616.53
Mesh 325 $277.82 $329.59 $639.74